IMPERIAL 76170 SAE ALLOY LOCKWASHER 1/4"

IMPERIAL 76170 SAE ALLOY LOCKWASHER 1/4" Reviews

Other Picture

IMPERIAL 76170 SAE ALLOY LOCKWASHER 1/4" Feature

• Size: 1/4"
• ASME B18.21.1 approved
• ASTM B633 Type II SC1
• Not brittle at low temperature.
• Quantity: 500 Per Package.

"IMPERIAL" SAE ALLOY LOCKWASHER Size: 1/4" ASME B18.21.1 approved ASTM B633 Type II SC1 Not brittle at low temperature. Quantity: 500 Per Package. SAE approved alloy coil spring steel. Tempered for non-linking positive locking. Greater resistance to high temperature. Greater resistance to loosening from vibration. Alloy Lock Washers for use with Grade 8 fasteners. Zinc; yellow dichromate plating for corrosion resistance. Tighter assemblies due to greater bolt tension per unit of torque.

Visit Store Now !!

Detail Products

Detail Reviews

Precision Shim Flat Washer for Bearing Outer Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.503"-0.508" ID, 0.618"-0.623" OD, 0.005" Thick (Pack of 25)

Precision Shim Flat Washer for Bearing Outer Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.503"-0.508" ID, 0.618"-0.623" OD, 0.005" Thick (Pack of 25) Reviews

Other Picture

Precision Shim Flat Washer for Bearing Outer Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.503"-0.508" ID, 0.618"-0.623" OD, 0.005" Thick (Pack of 25) Feature

• Shim washers are manufactured with extremely tight thickness tolerances so they can be used to make up an exact dimension
• Designed to protect the outer race of a bearing, or for a special dimensioned flat washer
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• Precision machinery, technical instrumentation, prototypes, model makers, power transmission
• Made In USA for excellent quality conformance

These Shim Washers are also known as Bearing Outer Race Spacers, and Precision Shaft Spacing Shim Washers. A comprehensive line offering thicknesses from 0.003" up to 0.020" from stock. Sizes are keyed to industry standard bearings - 3/64 X 5/32", .055 X 3/16", 5/64 X 1/4", 1/8 X 1/4", 3/32 X 5/16", 1/8 X 5/16", 1/8 X 3/8", 3/16 X 3/8", 3/16 X 1/2", 1/4 X 1/2", 1/4 X 5/8", 3/8 X 7/8". Manufactured from full hard 300 series stainless for strength and corrosion resistance. 100% made in the USA of DFARS compliant steel.

Used originally to go between the outer race of a bearing and the component that it is attached to, they have evolved into a tight tolerance precision shim used in electronics, industrial, and power transmission applications. Precision stamped, and burr free.

Visit Store Now !!

Detail Products

Detail Reviews

Nylon 6/6 Shoulder Washer, 0.140" ID, 0.220" OD, 0.047" Thick, 0.325" Shoulder Diameter, 0.797" Length (Pack of 100)

Nylon 6/6 Shoulder Washer, 0.140" ID, 0.220" OD, 0.047" Thick, 0.325" Shoulder Diameter, 0.797" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Shoulder Washer, 0.140" ID, 0.220" OD, 0.047" Thick, 0.325" Shoulder Diameter, 0.797" Length (Pack of 100) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Nylon 6/6 Hex Nut, 1/4"-20 (Pack of 100)
• Nylon 6/6 Hex Bolt, #10-32, 1-1/4" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Hex Head, 1/4"-20, 2" Length (Pack of 100)

Detail Reviews

Nylon 6/6 Shoulder Washer, 0.617" ID, 0.750" OD, 0.046" Thick, 0.880" Shoulder Diameter, 0.249" Length (Pack of 100)

Nylon 6/6 Shoulder Washer, 0.617" ID, 0.750" OD, 0.046" Thick, 0.880" Shoulder Diameter, 0.249" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Shoulder Washer, 0.617" ID, 0.750" OD, 0.046" Thick, 0.880" Shoulder Diameter, 0.249" Length (Pack of 100) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Nylon 6/6 Hex Nut, 1/4"-20 (Pack of 100)
• Nylon 6/6 Hex Bolt, #10-32, 1-1/4" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Hex Head, 1/4"-20, 2" Length (Pack of 100)

Detail Reviews

Nylon 6/6 Shoulder Washer, 0.391" ID, 0.545" OD, 0.100" Thick, 0.745" Shoulder Diameter, 0.255" Length (Pack of 100)

Nylon 6/6 Shoulder Washer, 0.391" ID, 0.545" OD, 0.100" Thick, 0.745" Shoulder Diameter, 0.255" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Shoulder Washer, 0.391" ID, 0.545" OD, 0.100" Thick, 0.745" Shoulder Diameter, 0.255" Length (Pack of 100) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Nylon 6/6 Hex Nut, 1/4"-20 (Pack of 100)
• Nylon 6/6 Hex Bolt, #10-32, 1-1/4" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Hex Head, 1/4"-20, 2" Length (Pack of 100)

Detail Reviews

Stainless Steel 18-8 Flat Washer, ANSI, 5/16", 0.344" ID, 0.875" OD, 0.063" Thick (Pack of 100)

Stainless Steel 18-8 Flat Washer, ANSI, 5/16", 0.344" ID, 0.875" OD, 0.063" Thick (Pack of 100) Reviews

Other Picture

Stainless Steel 18-8 Flat Washer, ANSI, 5/16", 0.344" ID, 0.875" OD, 0.063" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Stainless Steel is suitable where formability and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.

Visit Store Now !!

Detail Products

• Stainless Steel Hex Nut, 1/4"-20 (Pack of 100)
• Stainless Steel 18-8 Split Lock Washer, DIN, M2, 2.1mm ID, 4.4mm OD, 0.5mm Thick (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #10-32, 9/16" Length (Pack of 100)
• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Zinc Plated Steel Hex Nut, #1-72 (Pack of 100)

Detail Reviews

Nylon 6/6 Flat Washer, DIN, M4, 4.30mm ID, 9mm OD, 0.8mm Thick (Pack of 100)

Nylon 6/6 Flat Washer, DIN, M4, 4.30mm ID, 9mm OD, 0.8mm Thick (Pack of 100) Reviews

Other Picture

Nylon 6/6 Flat Washer, DIN, M4, 4.30mm ID, 9mm OD, 0.8mm Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Frequently used as a material for bearings and other wear surfaces, Nylon 6/6 offers low friction and good fatigue resistance. Nylon has been used in temperatures as low as -40F (-40C). Under flexural load of 264 PSI it endures temperatures as high as 158 to 212F (70 to 100C). Plus it stands up to a wide spectrum of fuels, oils and other chemicals.

Visit Store Now !!

Detail Products

• Nylon 6/6 Hex Nut, 1/4"-20 (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.055" ID, 0.087" OD, 0.035" Thick, 0.300" Shoulder Diameter, 0.087" Length (Pack of 100)
• Nylon 6/6 Hex Bolt, #10-32, 1-1/4" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #10-32, 2" Length (Pack of 100)

Detail Reviews