1/4 Lock Washer (100 count) Reviews
1/4 Lock Washer
Thursday, June 23, 2011
Tuesday, June 21, 2011
IMPERIAL 76517 SAE ALLOY FLATWASHER GR #8 - 5/8
IMPERIAL 76517 SAE ALLOY FLATWASHER GR #8 - 5/8 Reviews
IMPERIAL 76517 SAE ALLOY FLATWASHER GR #8 - 5/8 Feature
- Size: 5/8
- Outside Diameter: 1-5/16
- Inside Diameter: 21/32
- Thickness: 0.122/.177
- Smooth burr-free surfaces.
Monday, June 20, 2011
S/S Flat Washers (Metric) 12 Mm 125-12-a2
S/S Flat Washers (Metric) 12 Mm 125-12-a2 Reviews
18-8 stainless steel metric flat washers
Saturday, June 18, 2011
MARS 79930* 7/32" FLAT SAE WASHERS #10
MARS 79930* 7/32" FLAT SAE WASHERS #10 Reviews
MARS 79930* 7/32" FLAT SAE WASHERS #10 Feature
- WASHERS
Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, #10 Bolt Size, 0.203" ID, 0.443" OD, 0.062" Thick (Pack of 50)
Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, #10 Bolt Size, 0.203" ID, 0.443" OD, 0.062" Thick (Pack of 50) Reviews
Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, #10 Bolt Size, 0.203" ID, 0.443" OD, 0.062" Thick (Pack of 50) Feature
- Insulating Washers of Fiberglass protect components from heat and electricity, and are chemically resistant
- These washers are thicker compared to their outer diameter than usual, for greater strength and insulation
- Polyster Glass Laminates (Fiberglass) come in light tan and green colors
- This Fiberglass material meets General Purpose NEMA (National Electrical Manufacturers Association) GPO-1 Standards
- Made In USA for excellent quality conformance
Polyster Glass Laminates (Fiberglass) come in light tan and green colors, this material meets General Purpose NEMA (National Electrical Manufacturers Association) GPO-1 Standards.Temperatures up to aprox 200 degress are not a problem for this material
Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.
Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.
Friday, June 17, 2011
Nylon 6/6 Shoulder Washer, 0.113" ID, 0.143" OD, 0.046" Thick, 0.250" Shoulder Diameter, 0.046" Length (Pack of 50)
Nylon 6/6 Shoulder Washer, 0.113" ID, 0.143" OD, 0.046" Thick, 0.250" Shoulder Diameter, 0.046" Length (Pack of 50) Reviews
Nylon 6/6 Shoulder Washer, 0.113" ID, 0.143" OD, 0.046" Thick, 0.250" Shoulder Diameter, 0.046" Length (Pack of 50) Feature
- Shoulder Washers protect screws, wire, and tubing from corrosion
- Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
- Size Name corresponds to matching screw or bolt size
Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).
Visit Store Now !!
Detail Products
Detail Reviews
Wednesday, June 15, 2011
Precision Shim Flat Washer for Bearing Inner Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.093"-0.098" ID, 0.198"-0.208" OD, 0.016" Thick (Pack of 25)
Precision Shim Flat Washer for Bearing Inner Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.093"-0.098" ID, 0.198"-0.208" OD, 0.016" Thick (Pack of 25) Reviews
Precision Shim Flat Washer for Bearing Inner Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.093"-0.098" ID, 0.198"-0.208" OD, 0.016" Thick (Pack of 25) Feature
- Shim washers are manufactured with extremely tight thickness tolerances so they can be used to make up an exact dimension
- Designed to fit over precision shafts and protect the Inner Race of a Bearing
- 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
- Precision machinery, technical instrumentation, prototypes, model makers, power transmission
- Made In USA for excellent quality conformance
Used originally to go between the inner race of a bearing and the shaft support, they have evolved into a tight tolerance precision shim used in electronics, industrial, and power transmission applications. Precision stamped, and burr free.
Tuesday, June 14, 2011
Nylon 6/6 Shoulder Washer, 0.885" ID, 0.995" OD, 0.156" Thick, 1.250" Shoulder Diameter, 0.499" Length (Pack of 100)
Nylon 6/6 Shoulder Washer, 0.885" ID, 0.995" OD, 0.156" Thick, 1.250" Shoulder Diameter, 0.499" Length (Pack of 100) Reviews
Nylon 6/6 Shoulder Washer, 0.885" ID, 0.995" OD, 0.156" Thick, 1.250" Shoulder Diameter, 0.499" Length (Pack of 100) Feature
- Shoulder Washers protect screws, wire, and tubing from corrosion
- Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
- Size Name corresponds to matching screw or bolt size
Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).
Visit Store Now !!
Detail Products
Detail Reviews
Monday, June 13, 2011
Wide Shim Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1.000" ID, 2.000" OD, 0.075" Thick (Pack of 5)
Wide Shim Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1.000" ID, 2.000" OD, 0.075" Thick (Pack of 5) Reviews
Wide Shim Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1.000" ID, 2.000" OD, 0.075" Thick (Pack of 5) Feature
- Large diameter thin shim washers, sometimes referred to as machinery bushings
- Used as a wear shim between two moving parts
- 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
- Used in machinery, shafts and bearings, power transmission, and anywhere a thin and wide shim is needed
- Made In USA for excellent quality conformance
Sunday, June 12, 2011
IMPERIAL 12634 METRIC FLAT WASHER M24 LARGE I.D.
IMPERIAL 12634 METRIC FLAT WASHER M24 LARGE I.D. Reviews
IMPERIAL 12634 METRIC FLAT WASHER M24 LARGE I.D. Feature
- "IMPERIAL SUPPLIES" FLATWASHER
- DIN 125.
- Low carbon.
- Zinc plated for corrosion resistance.
- Bolt Size: M24.
Saturday, June 11, 2011
Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.813" ID, 3.000" OD, 0.125" Thick (Pack of 5)
Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.813" ID, 3.000" OD, 0.125" Thick (Pack of 5) Reviews
Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.813" ID, 3.000" OD, 0.125" Thick (Pack of 5) Feature
- Fender Flat Washers have extra large outside diameters in relation to their bolt size
- Extra large Outside Diameter spreads the load over a wider area, and the extra thickness of these washers provide extra strength as well
- A stamped product from low carbon steel, soft, and zinc plated for corrosion resistance
- A versatile washer used anywhere that a large bearing surface and thickness are needed
- Made In USA for excellent quality conformance
Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.
Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.
Friday, June 10, 2011
MIL-SPEC Flat Washer, Meets Spec NAS1149, 18-8 Stainless Steel, Round Shape, USA Made, #10 Bolt Size , 0.203" ID, 0.438" OD, 0.032" Thick (Pack of 100)
MIL-SPEC Flat Washer, Meets Spec NAS1149, 18-8 Stainless Steel, Round Shape, USA Made, #10 Bolt Size , 0.203" ID, 0.438" OD, 0.032" Thick (Pack of 100) Reviews
MIL-SPEC Flat Washer, Meets Spec NAS1149, 18-8 Stainless Steel, Round Shape, USA Made, #10 Bolt Size , 0.203" ID, 0.438" OD, 0.032" Thick (Pack of 100) Feature
- Made in the USA to Military Specifications
- NAS1149 is an updated version of the general purpose Military Specification Flat Washer
- 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
- The sizes listed in this specification cover most industrial and military uses
- Tight tolerances allow use in precision applications
Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.
Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.
Thursday, June 9, 2011
3/8X1 1/2 Fender Washer (100 count)
3/8X1 1/2 Fender Washer (100 count) Reviews
3/8X1 1/2 Fender Washer
Subscribe to:
Posts (Atom)