IMPERIAL 15328 10.9 METRIC HEX HEAD CAP SCREW M24 X 80MM

IMPERIAL 15328 10.9 METRIC HEX HEAD CAP SCREW M24 X 80MM Reviews

Other Picture

IMPERIAL 15328 10.9 METRIC HEX HEAD CAP SCREW M24 X 80MM Feature

• "IMPERIAL SUPPLIES" SCREWS
• 150,800 psi.
• DIN 931 = Partial Thread Course Pitch
• Zinc plated for corrosion resistance.
• Product may be fully or partially threaded; subject to manufacturer availability.

"IMPERIAL SUPPLIES" SCREWS 150,800 psi. DIN 931 = Partial Thread Course Pitch Zinc plated for corrosion resistance. Product may be fully or partially threaded; subject to manufacturer availability.

Visit Store Now !!

Detail Products

Detail Reviews

Nylon 6/6 Shoulder Washer, 0.114" ID, 0.138" OD, 0.062" Thick, 0.240" Shoulder Diameter, 0.108" Length (Pack of 50)

Nylon 6/6 Shoulder Washer, 0.114" ID, 0.138" OD, 0.062" Thick, 0.240" Shoulder Diameter, 0.108" Length (Pack of 50) Reviews

Other Picture

Nylon 6/6 Shoulder Washer, 0.114" ID, 0.138" OD, 0.062" Thick, 0.240" Shoulder Diameter, 0.108" Length (Pack of 50) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Nylon 6/6 Hex Nut, #4-40 (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 7/8" Length (Pack of 100)
• Nylon 6/6 Hex Bolt, #10-32, 1/4" Length (Pack of 50)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, 1/4"-20, 3" Length (Pack of 25)

Detail Reviews

Nylon 6/6 Flat Washer, 1/4", 0.26" ID, 0.687" OD, 0.040" Thick (Pack of 100)

Nylon 6/6 Flat Washer, 1/4", 0.26" ID, 0.687" OD, 0.040" Thick (Pack of 100) Reviews

Other Picture

Nylon 6/6 Flat Washer, 1/4", 0.26" ID, 0.687" OD, 0.040" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Nylon 6/6 Hex Nut, #4-40 (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.256" ID, 0.290" OD, 0.031" Thick, 0.348" Shoulder Diameter, 0.093" Length (Pack of 100)
• Nylon 6/6 Hex Bolt, #10-32, 1/4" Length (Pack of 50)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 7/8" Length (Pack of 100)

Detail Reviews

Nylon 6/6 Shoulder Washer, 0.112" ID, 0.150" OD, 0.042" Thick, 0.280" Shoulder Diameter, 0.227" Length (Pack of 100)

Nylon 6/6 Shoulder Washer, 0.112" ID, 0.150" OD, 0.042" Thick, 0.280" Shoulder Diameter, 0.227" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Shoulder Washer, 0.112" ID, 0.150" OD, 0.042" Thick, 0.280" Shoulder Diameter, 0.227" Length (Pack of 100) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #6-32, 3/8" Length (Pack of 100)
• Nylon 6/6 Hex Nut, #4-40 (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, 1/4"-20, 3" Length (Pack of 25)
• Nylon 6/6 Hex Bolt, 1/4"-20, 1" Length (Pack of 100)

Detail Reviews

Bunting Bearings TT1204 5/8" Bore x 1 1/4" OD x 1/16" Thickness Powdered Metal SAE 841 Thrust Washers

Bunting Bearings TT1204 5/8" Bore x 1 1/4" OD x 1/16" Thickness Powdered Metal SAE 841 Thrust Washers Reviews

Other Picture

Bunting Bearings TT1204 5/8" Bore x 1 1/4" OD x 1/16" Thickness Powdered Metal SAE 841 Thrust Washers Feature

• Self Lubricating Bronze Bearing; SAE 30 Oil provides ideal lubrication in most applications
• Large Working Temperature Range, 10 F to 220 F
• Conformance to ASTM chemical and physical properties
• Non Magnetic
• Corrosion resistant

Bunting Bearings offers a complete line of stock plain bearings, flange bearings and washers made of P/M bronze. Bunting sintered bronze stock bearings have long conformed to ASTM chemical and physical properties, and are the first to include all ASTM standard sizes to ASTM recommended dimensions and tolerances. After forming, sintering and sizing, the bearings are vacuum impregnated with SAE 30 oil that provides lubricant which is metered from the bearing to the shaft during rotation. Standard off-the-shelf oil impregnated bronze bearings should function satisfactorily in temperatures ranging from 10°F to 220°F.

Visit Store Now !!

Detail Products

Detail Reviews

Bunting Bearings EW061201 3/8" Bore x 3/4" OD x 1/16" Thickness Powdered Metal SAE 841 Thrust Washers

Bunting Bearings EW061201 3/8" Bore x 3/4" OD x 1/16" Thickness Powdered Metal SAE 841 Thrust Washers Reviews

Other Picture

Bunting Bearings EW061201 3/8" Bore x 3/4" OD x 1/16" Thickness Powdered Metal SAE 841 Thrust Washers Feature

• Self Lubricating Bronze Bearing; SAE 30 Oil provides ideal lubrication in most applications
• Large Working Temperature Range, 10 F to 220 F
• Conformance to ASTM chemical and physical properties
• Non Magnetic
• Corrosion resistant

Bunting Bearings offers a complete line of stock plain bearings, flange bearings and washers made of P/M bronze. Bunting sintered bronze stock bearings have long conformed to ASTM chemical and physical properties, and are the first to include all ASTM standard sizes to ASTM recommended dimensions and tolerances. After forming, sintering and sizing, the bearings are vacuum impregnated with SAE 30 oil that provides lubricant which is metered from the bearing to the shaft during rotation. Standard off-the-shelf oil impregnated bronze bearings should function satisfactorily in temperatures ranging from 10°F to 220°F.

Visit Store Now !!

Detail Products

Detail Reviews

Stainless Steel 304 Bartite Sealing Washer, 1/4", 0.255" ID, 5/8" OD, 0.073" Thick (Pack of 100)

Stainless Steel 304 Bartite Sealing Washer, 1/4", 0.255" ID, 5/8" OD, 0.073" Thick (Pack of 100) Reviews

Other Picture

Stainless Steel 304 Bartite Sealing Washer, 1/4", 0.255" ID, 5/8" OD, 0.073" Thick (Pack of 100) Feature

• Sealing Washers have a sealant adhered to the underside of the washer
• Stainless Steel is suitable where formability and cost are important considerations
• Withstands 12,000 lbs psi hydrostatic pressure
• Low-profile design was developed to seal when space is limited
• Size Name corresponds to matching screw or bolt size

Sealing Washers are one-piece washers with sealant adhered to the underside, making them ready for immediate, time-saving assembly. Now an industrial standard, these economical washers have been supplying sealing solutions in aerospace, construction, defense, lighting, and marine applications for decades.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #1-72, 5/16" Length (Pack of 100)
• Stainless Steel Socket Cap Screw, Hex Socket Drive, MIL-SPEC, #6-32, 3/4" Length (Pack of 50)
• Stainless Steel 316 Hex Bolt, 3/8"-16, 2" Length (Pack of 5)
• Black Oxide Heat Treated Alloy Steel Socket Head Cap Screw, Hex Socket Drive, 1/4"-28, 2-1/4" Length (Pack of 100)
• Stainless Steel 18-8 Barclad Sealing Washer, #10, 0.19" ID, 7/16" OD, 0.05" Thick (Pack of 100)

Detail Reviews

Component Flat Washer, Brass, Round Shape, USA Made, 5/8" Bolt Size, 0.656" ID, 1.375" OD, 0.125" Thick (Pack of 5)

Component Flat Washer, Brass, Round Shape, USA Made, 5/8" Bolt Size, 0.656" ID, 1.375" OD, 0.125" Thick (Pack of 5) Reviews

Other Picture

Component Flat Washer, Brass, Round Shape, USA Made, 5/8" Bolt Size, 0.656" ID, 1.375" OD, 0.125" Thick (Pack of 5) Feature

• An extra thick flat washer that comes in steel, 18-8 and 316 Stainless, and Brass
• A stamped flatwasher originally used in the tool and die industry, and now used for its' extra thick design which has superior load distribution properties
• Brass is a soft material that offers excellent corrosion resistance, especially in marine environments, and are not magnetic
• Used for general MRO and industrial applications - excellent for marine environments
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. Brass material offers excellent corrosion resistance, are non magnetic, soft, and are an attractive gold color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Brass C260 Seamless Round Tubing, 3/16" OD,0.160"ID, 0.014" Wall, 36" Length
• Advanced Tool Design Model ATD-359 110 Piece Copper Washer Assortment
• Dremel 512E EZ Lock Fine Grit Finishing Abrasive Buffs, 2-Pack

Detail Reviews

S A E Flat Washer Zinc 7/8 (50lb Box)

S A E Flat Washer Zinc 7/8 (50lb Box) Reviews

Other Picture

S A E Flat Washer Zinc 7/8 (50lb Box)

Visit Store Now !!

Detail Products

Detail Reviews

Nylon Shoulder Washer, 0.202" ID, 0.310" OD, 0.079" Thick, 0.433" Shoulder Diameter, 0.394" Length (Pack of 25)

Nylon Shoulder Washer, 0.202" ID, 0.310" OD, 0.079" Thick, 0.433" Shoulder Diameter, 0.394" Length (Pack of 25) Reviews

Other Picture

Nylon Shoulder Washer, 0.202" ID, 0.310" OD, 0.079" Thick, 0.433" Shoulder Diameter, 0.394" Length (Pack of 25) Feature

• Shoulder Washers protect screws, wire, and tubing from corrosion
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Shoulder Washers, also known as insulator washers and shoulder spacers, insulate and protect screws, wire, and tubing from corrosion.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

Detail Reviews

Hillman 280334 1in Sae Flat Washer

Hillman 280334 1in Sae Flat Washer Reviews

Other Picture

Hillman 280334 1in Sae Flat Washer Feature

• "HILLMAN" FLAT WASHERS
• SAE
• Grade 8
• Zinc dichromate
• 1"

Hardened. Grade 8. Yellow dichromate.

Visit Store Now !!

Detail Products

Detail Reviews